specification control drawing raychem thermofit devices raychem corporation 300 constitution drive menlo park, ca 94025 usa title: soldersleeve* device with pre-installed lead unless otherwise specified dime nsions are in millimeters. inches dimensions are between brackets. document no.: d-103-3x tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron raychem reserves the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. dcr number: d981005 replaces: d1033x drawn by: m. foronda date: 06/15/98 prod. rev. see table doc issue: 5 scale: none size: a sheet: 1 of 1 if this document is printed it becomes unc ontrolled. check for the latest revision. materials 1. insulation sleeve: heat-shrinkabl e, transparent blue, radiation cross-linked polyvinylidene fluoride. 2. solder preform with flux: solder: type sn63 per ansi-j-std-006. flux: type rol1 per ansi-j-std-004. thermal indicator: red. 3. meltable rings: thermally stab ilized thermoplastic. color:gray. 4. ground lead: raychem 55a0111-xy in accordance with mil-w-22759/32 awg ?xy? (see table) stranded tin plated copper. color: see table. application 1. these parts are designed to provide an environmen t protected shield termination on cables, rated for 125 c minimum, meeting the dimensional criteria listed, having a tin or silverplated copper shields. 2. temperature range: -55 c to +150 c. install using raychem-approved convection or infrared hea ting tools in accordance with raychem process standard rcps-100-7 0. for best results, prepare the cable as shown: * a trademark of raychem corporation. ?xy? = wire gauge (awg) product revision product dimens ions cable dimensions product name l max ?a min ?b min k min awg ?d max ?e min j 0.5 (j 0.02) color of item 4 d-103-33 m 22 black d-103-34 n 20.5 7.00 7.60 150 22 7.00 3.56 7.00 white D-103-35 m (0.805) (0.275) (0.300) (5. 900) 20 (0.275) (0.140) (0.275) black d-103-36 m 20 white
|